BONIDE DELTA DUST

Which of the following is an explicitly prohibited action regarding household items during application?

• Using food utensils for application. ✓
• Applying to ornamental plants.
• Applying to garden vegetables.
• Applying in cracks and crevices.

Answer: The Use restrictions section states: 'Do not use food utensils (teaspoons/measuring cups) for application.'

🔗 Source

What environmental condition should be met to prevent product drift during application?

• The air must be calm. ✓
• The temperature must be between 65° and 80°F.
• Humidity must be above 50%.
• Wind speed must be at least 5 mph.

Answer: The Timing and weather conditions section states: 'Apply when air is calm to avoid drift.'

🔗 Source

What is the temperature range requirement for fire ant treatment?

• 45° to 65°F
• 65° to 80°F ✓
• 70° to 90°F
• 80° to 100°F

Answer: The Timing and weather conditions section states: 'For fire ant treatment, apply when temperatures are between 65° and 80°F.'

🔗 Source

When applying Bonide Delta Dust to the leaves of vegetables or ornamentals, what is the required application rate?

• 0.05 oz/100 sq. ft.
• 2 oz/100 sq. ft. ✓
• 6 oz/100 sq. ft.
• 8 oz/100 sq. ft.

Answer: The application rates and targets section states for Vegetables/Ornamentals: rate: 2; unit: oz/100 sq. ft.

🔗 Source

Which of the following is a prohibited application site for Bonide Delta Dust when used indoors?

• Cracks and crevices
• Voids in walls
• Carpets and upholstery ✓
• Various surfaces

Answer: Under Use restrictions: 'Do not apply to carpets, upholstery, or fabrics indoors to avoid staining.'

🔗 Source

When applying the product to leaves, how should the coverage be managed?

• Apply only to the upper leaf surface.
• Apply only to the lower leaf surface.
• Apply lightly to cover both upper and lower leaf surfaces. ✓
• Apply heavily to ensure deep penetration.

Answer: The application rates and targets section for Vegetables/Ornamentals notes: 'Apply lightly to cover both upper and lower leaf surfaces.'

🔗 Source

According to the label, what is the recommended procedure after applying the product into a carpenter ant void?

• Re-apply the dust every 30 days until activity ceases.
• Apply a liquid spray to the exterior of the nest.
• Inspect the colony after 6 months. ✓
• Apply a second coating to the void after 3 days.

Answer: The text states: 'When treating carpenter ant voids, the dust should be applied into the void, and the colony should be inspected after 6 months.'

🔗 Source

To avoid aquatic toxicity, where should the product be kept away from during application?

• Drains and sewers.
• Water bodies.
• Areas where drainage to water bodies occurs.
• All of the above. ✓

Answer: The label states: 'avoid application near water or drains' and 'Do not apply directly into sewers, drains, or any area where drainage to water bodies occurs.'

🔗 Source