Debug ON 2026 03 22

When treating high population crops like berries and fruit trees per 1/2 Acre, what is the required dilution range?

• 125 to 150 gallons of water ✓
• 25 to 50 gallons of water
• 50 to 75 gallons of water
• 200 to 250 gallons of water

Answer: For high population crops like berries and fruit trees per 1/2 Acre, the label requires 125 to 150 gallons of water.

🔗 Source

If an infestation persists in outdoor turf, what is the recommended interval for repeat application?

• 7 – 10 days ✓
• 1 – 3 days
• 14 – 21 days
• 24 – 48 hours

Answer: The label states to repeat the application at 7 – 10 days interval if infestation persists for turf.

🔗 Source

What is a critical restriction regarding the use of the product mixture?

• DO NOT SAVE MIXED MATERIAL. ✓
• Do not use in temperatures above 90 degrees.
• Do not apply within 10 feet of water sources.
• Do not mix with fertilizers.

Answer: The restrictions section explicitly states 'DO NOT SAVE MIXED MATERIAL.'

🔗 Source

When applying to outdoor turf, how deep should the material be pushed using sprinklers or other means?

• 3/4 inch – 1/2 inch below ground level ✓
• 1 inch – 2 inches below ground level
• Exactly 1/2 inch below ground level
• At the surface only

Answer: The label instructs to deliver additional water to push the material to 3/4 inch – 1/2 inch below ground level.

🔗 Source

Which of the following is a target pest for Debug ON 2026 03 22?

• Worm and insect ✓
• Rodents
• Termites
• Aphids only

Answer: The label identifies the target pest for turf applications as 'worm and insect'.

🔗 Source

When applying Debug ON 2026 03 22 to outdoor turf to control worms and insects, what is the required pH level for the mixture?

• Around 5.5 by using a buffer ✓
• Exactly 7.0 neutral
• Between 4.0 and 5.0
• Between 6.5 and 7.5

Answer: The label states to ensure that the pH of the turf mixture is around 5.5 by using a buffer.

🔗 Source

For greenhouse crops (indoor application), what is the required finished strength of the solution?

• 1.0% - 3% ✓
• 5% - 10%
• 0.5% - 1.5%
• 10% - 20%

Answer: The label specifies preparing a 1.0% - 3% solution for greenhouse crops.

🔗 Source

What is the recommended application timing for spraying Debug ON 2026 03 22?

• Early morning, late afternoon, or evenings ✓
• Mid-day when sun is highest
• Only during heavy rain
• At noon to avoid wind

Answer: The timing/weather instructions specify to spray in the early morning, late afternoon, or evenings.

🔗 Source