Howler EVO

In which of the following locations can Howler EVO be applied?

• Only in outdoor forests
• Only in indoor greenhouses
• Crops, plants, greenhouses, nurseries, and forests ✓
• Residential lawns and gardens only

Answer: The label states the product is used on crops, plants, greenhouses, nurseries, and forests.

🔗 Source

Under which wind speed conditions should application be avoided to prevent inversion potential?

• When wind speeds are less than 3 mph ✓
• When wind speeds are exactly 10 mph
• When wind speeds are between 5 and 8 mph
• When wind speeds are greater than 20 mph

Answer: The label instructs to avoid application when wind speeds are less than 3 mph to prevent inversion potential.

🔗 Source

Which of the following is a prohibited application site for Howler EVO?

• Hydroponic growth systems
• Forests
• Areas where surface water is present ✓
• Nurseries

Answer: The restrictions state: Do not apply directly to water or to areas where surface water is present.

🔗 Source

When using chemigation to apply Howler EVO, what safety requirement must be met?

• The system must include backflow preventers ✓
• The system must be used only at night
• The system must be applied via aerial methods
• The system must be used in intertidal areas

Answer: The label specifies that when using chemigation, the system must include necessary safety devices like backflow preventers.

🔗 Source

According to the label, what must be done during the mixing and application process to ensure a uniform solution?

• Allow the solution to settle before use
• Maintain agitation ✓
• Add extra water to increase volume
• Apply only during temperature inversions

Answer: The label states to always maintain agitation when mixing and applying to ensure a uniform solution.

🔗 Source

What is the primary target of Howler EVO?

• Fungal diseases ✓
• Insect infestations
• Weed control
• Rodent populations

Answer: The label describes Howler EVO as a biological fungicide used to control various fungal diseases in plants.

🔗 Source

What is the recommended wind speed range to avoid during application to manage drift and inversions?

• Avoid speeds greater than 10 mph and speeds less than 3 mph ✓
• Avoid speeds between 15 and 20 mph
• Avoid speeds less than 50 mph
• Avoid speeds greater than 1 mph

Answer: The label advises avoiding application during high wind speeds (greater than 10 mph) or when wind speeds are less than 3 mph.

🔗 Source

Which set of Personal Protective Equipment (PPE) is required for using Howler EVO?

• Short sleeves, shorts, and sandals
• Long pants, long-sleeved shirt, protective eyewear, waterproof gloves, and shoes plus socks ✓
• A full chemical hazmat suit and heavy boots
• Only a NIOSH-approved respirator

Answer: The PPE section requires long pants, long-sleeved shirt, protective eyewear, waterproof gloves, and shoes plus socks.

🔗 Source