Miravis Ace

According to the label, what are the two active ingredients present in Miravis Ace?

• Pydiflumetofen (13.7%) and Propiconazole (11.4%) ✓
• Pydiflumetofen (11.4%) and Propiconazole (13.7%)
• Pydiflumetofen (13.7%) and Viton® (11.4%)
• Propiconazole (13.7%) and Pydiflumetofen (11.4%)

Answer: The product description states: 'It contains two active ingredients: Pydiflumetofen (13.7%) and Propiconazole (11.4%).'

🔗 Source

Which of the following is a required component of the Personal Protective Equipment (PPE) for handling Miravis Ace?

• Nitrile, butyl, neoprene, or Viton® chemical-resistant gloves ✓
• Latex or vinyl gloves
• Safety glasses and a respirator
• Long-sleeved shirt and short pants

Answer: The PPE section specifies: 'Chemical-resistant gloves (barrier laminate, butyl, nitrile, neoprene rubber, or Viton®)'.

🔗 Source

What precaution must be taken regarding application near water bodies?

• Do not apply if the water is moving.
• Do not apply where runoff could impact aquatic organisms. ✓
• Only apply if the water level is high.
• Do not apply during irrigation.

Answer: The use restrictions state: 'Do not apply near water bodies where runoff could impact aquatic organisms.'

🔗 Source

To manage spray drift during application, the user should monitor which environmental factor?

• Rainfall
• Wind conditions ✓
• Temperature inversions
• Humidity

Answer: The timing and weather conditions section states: 'Monitor wind conditions to manage spray drift.'

🔗 Source

What is the Restricted-Entry Interval (REI) for Miravis Ace?

• 24 hours
• 48 hours
• 12 hours ✓
• 6 hours

Answer: The REI section states: 'Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours.'

🔗 Source

Under which weather conditions should application be avoided to ensure effective product performance?

• When rainfall or irrigation is expected within 48 hours.
• When temperature inversions occur.
• During high wind speeds.
• Both A and B. ✓

Answer: The timing and weather conditions section states to 'Avoid application when rainfall or irrigation is expected to occur within 48 hours' and 'Avoid application during temperature inversions.'

🔗 Source

When mixing Miravis Ace alone in a spray or mixing tank, what is the correct sequence for dilution?

• Add the product first, then add all the water and agitate.
• Add all the water, add the product, and agitate.
• Add 1/2 to 2/3 of the required water, add the product, continue agitation, then add the remaining water. ✓
• Add 1/2 of the water, add the product, stop agitation, then add the remaining water.

Answer: The mixing and dilution notes state: 'When mixing alone, add 1/2 to 2/3 of the required amount of water to the spray or mixing tank, then add Miravis Ace, continue agitation, then add the remaining water.'

🔗 Source

Where is Miravis Ace specifically designed for use?

• Vegetable crops
• Cereal grains ✓
• Fruit trees
• Turfgrass

Answer: The product description states: 'This product is designed for use on cereal grains to manage various important plant diseases.'

🔗 Source