PERMETHRIN CS 2026 03 22

If a technician is mixing a 50 gallon tank, how much concentrate should be used according to the mixing instructions?

• 4 - 8 fl. oz.
• 7 - 14 fl. oz.
• 10 - 20 fl. oz. ✓
• 20 - 40 fl. oz.

Answer: The mixing table specifies 10 - 20 fl. oz. of concentrate per 50 gal tank.

🔗 Source

What is the specified rate for treating Fleas in infested areas?

• 0.5% ✓
• 1.0%
• 2 2/3 oz.
• 1 gal per 10 sq. ft.

Answer: The label lists the rate for Fleas in infested areas as 0.5%.

🔗 Source

What is the required application rate for treating Darkling Beetles?

• 0.5 - 1.0% emulsion
• 2 2/3 - 5 1/3 fl. oz. concentrate per 1,000 sq. ft. ✓
• 1 gal per 10 sq. ft.
• 10 - 20 fl. oz. per 50 gal of water

Answer: The label specifies a rate of 2 2/3 - 5 1/3 fl. oz. concentrate per 1,000 sq. ft. for Darkling Beetles.

🔗 Source

When treating for flies, what is the maximum frequency allowed for application?

• Once every 24 hours
• No more than twice per week and at least 3 days apart ✓
• Once per week
• No more than three times per week

Answer: The label states to treat no more than twice per week and at least 3 days apart for flies.

🔗 Source

According to the restrictions, which of the following is prohibited?

• Applying to unmaintained areas
• Applying to crawling insects
• Applying to lactating or food animals ✓
• Applying to the perimeter of a building

Answer: The restrictions state: 'Do not apply to lactating or food animals.'

🔗 Source

Which specific type of ant is EXCLUDED from the target crawling insect list?

• Carpenter ants
• Fire ants
• Harvester ants
• Pharaoh ants ✓

Answer: The label explicitly excludes Pharaoh ants from the list of target ants.

🔗 Source

When applying to animal areas for House Flies and Stable Flies, how should the product be applied?

• As a dry powder
• As a coarse, wet spray ✓
• As a 0.5% emulsion only
• Via drilling and injecting

Answer: For House Flies and Stable Flies in animal areas, the label instructs to apply as a coarse, wet spray.

🔗 Source

When treating under slabs for Ants, Cockroaches, and Scorpions, what is the correct application method and rate?

• Broadcast to all surfaces at 0.5%
• 1 gal per 10 sq. ft. via drilling and injecting or horizontal rodding ✓
• 2 2/3 oz. per 1,000 sq. ft. around the perimeter
• 10 - 20 fl. oz. per 50 gal of water

Answer: For under slab treatments, the label specifies 1 gal per 10 sq. ft. via drilling and injecting or horizontal rodding.

🔗 Source