Taurus PT 505

When applying the product to Subterranean Termite cartons and nests, how long should the trigger be pulled per injection point?

• 6 – 60 seconds ✓
• 2 – 20 seconds
• 4 – 40 seconds
• 1 – 10 seconds

Answer: For Subterranean Termite cartons and nests, the notes specify 6 – 60 seconds of trigger pull per injection point.

🔗 Source

If you are applying Taurus PT 505 to dense soil that will not accept 4 gallons per linear foot per foot of depth, what is the required dilution and rate?

• 0.06% at 4 gallons per 10 linear feet
• 0.125% at 2 gallons per 10 linear feet per foot of depth ✓
• 0.09% at 2 gallons per 10 square feet
• 0.125% at 1.0 gallon per 10 linear feet

Answer: For dense soil, the label specifies a rate of 2 gallons per 10 linear feet per foot of depth at a 0.125% dilution.

🔗 Source

What is the minimum concentration that may be used when applying Taurus PT 505?

• 0.03%
• 0.06% ✓
• 0.09%
• 0.125%

Answer: The label states: 'Do not apply at a concentration less than 0.06%.'

🔗 Source

Which statement accurately describes the intended purpose of Taurus PT 505?

• It is a supplement and not a substitute for mechanical alteration, soil, and foundation treatment ✓
• It is intended to provide complete structural pest control
• It is designed to eliminate all future termite infestations
• It is a primary replacement for soil and foundation treatments

Answer: The label states it is not a substitute for mechanical alteration, soil and foundation treatment, but merely a supplement.

🔗 Source

What is the maximum amount of Taurus PT 505 allowed per 1,000 square feet of total internal surface area of a void, carton, or gallery?

• 5 grams (25.0 milligrams fipronil a.i.) ✓
• 1 gram
• 2 grams
• 10 grams

Answer: The label states DO NOT apply more than 5 grams (25.0 milligrams fipronil a.i.) per 1,000 square feet of total internal surface area.

🔗 Source

Which of the following pests is NOT listed as a target pest for Taurus PT 505?

• Carpenter ants
• Drywood termites
• Bed bugs ✓
• Borers

Answer: The label lists carpenter ants, drywood termites, and borers as target pests, but does not mention bed bugs.

🔗 Source

In which specific locations is the use of Taurus PT 505 restricted in California?

• Trees and piers ✓
• Fencing and decking
• Utility poles and railroad trestles
• Buildings and voids

Answer: The label states the site is not for use in California for trees and piers.

🔗 Source

When applying to vertical treated zones along the interior and exterior perimeter of foundation walls, what is the minimum finished dilution volume?

• 1.0 to 1.5 gallons per 10 square feet
• 4 gallons per 10 linear feet per foot of depth
• 2 gallons per 10 linear feet per foot of depth ✓
• 0.8 gallons per 10 linear feet

Answer: The label states not to apply at a lower finished dilution volume than 2 gallons per 10 linear feet per foot of depth for vertical treated zones.

🔗 Source