TRIPLE CROWN T&O INSECTICIDE

If skin contact with the product occurs, how long should you rinse the area with water?

• 5 to 10 minutes
• Immediately and only once
• 15 to 20 minutes ✓
• 30 to 60 minutes

Answer: The label instructs to rinse immediately with plenty of water for 15 to 20 minutes if skin contact occurs.

🔗 Source

What instruction is provided regarding watering after treatment if the soil is not moist?

• Do not water for 24 hours
• Water with 0.5 inches of water immediately after treatment ✓
• Apply heavy irrigation to prevent runoff
• Wait for the next rain event to water

Answer: The label states the product should be watered in with 0.5 inches of water immediately after treatment if soil is not moist.

🔗 Source

What is the required application rate for controlling Ants in lawns and landscaped areas?

• 0.15 fl oz/1000 ft² ✓
• 0.50 fl oz/1000 ft²
• 1.00 fl oz/1000 ft²
• 0.15 fl oz/500 ft²

Answer: The label specifies a rate of 0.15 fl oz/1000 ft² for Ants.

🔗 Source

Which of the following is a restriction regarding the size of the treatment area?

• Do not apply to areas larger than 5 acres
• Do not apply to lawns or turf areas less than 1000 sq. ft. ✓
• Do not apply to areas smaller than 5000 sq. ft.
• Do not apply to areas with more than 10 trees

Answer: The restrictions state: 'Do not apply to lawns or turf areas less than 1000 sq. ft.'

🔗 Source

What Personal Protective Equipment (PPE) is required when handling this product?

• Long-sleeved shirts, long pants, socks, shoes, and gloves ✓
• Chemical resistant apron and face shield
• N95 respirator and safety goggles
• Short sleeves and waterproof boots

Answer: The PPE section requires wearing long-sleeved shirts, long pants, socks, shoes, and gloves.

🔗 Source

Which of the following is a listed target pest for Triple Crown T&O Insecticide when applied to lawns and landscaped areas?

• Termites
• Japanese Beetles ✓
• Cockroaches
• Bed bugs

Answer: Japanese Beetles are explicitly listed as a target pest in the application rates section.

🔗 Source

To protect bees, when should you avoid applying this product?

• During the early morning
• When plants are in bloom ✓
• When the wind is blowing
• During the heat of the day

Answer: The label states to avoid applying when plants are in bloom to protect bees.

🔗 Source

According to the restrictions, which of the following is a prohibited application site?

• Athletic fields
• Parks
• Irrigation systems ✓
• Residential lawns

Answer: The restrictions explicitly state: 'Do not apply to any type of irrigation system.'

🔗 Source